We can generate a full SDCard distribution using buildroot or batocera.

Buildroot

Clone the branch pocketgo-s30 of our fork of the buildroot repo:

$ git clone -b pocketgo-s30 https://github.com/PocketGo-S30-CFW/buildroot.git
$ cd buildroot
$ make pocketgo_s30_defconfig
$ make

Once the build is finished, you will see something like this:

# ls output/images/
boot.scr  rootfs.ext2  rootfs.ext4  rootfs.tar  sdcard.img  sun8i-a33-pocketgo-s30.dtb  u-boot.bin  u-boot-sunxi-with-spl.bin  zImage

The sdcard.img contains the full system bootable image ready to be flashed into an SDCard.

Flash the image with:

$ sudo dd if=sdcard.img of=/dev/sdX bs=1024 status=progress

Once the card has been flashed, insert it in the PocketGo-S30, and restart. If you have the UART connected you will see the booot traces.